Showrooms in brick, timber and glass
Many Berkeley showrooms live in buildings that started out doing something else. West of San Pablo Avenue, former workshops and warehouses now hold tile and stone galleries, cabinet and fixture displays, lighting studios and furniture floors, often under skylights and exposed trusses. Along the Shattuck corridor, car showrooms sit behind tall street-facing glass. We clean showrooms throughout Berkeley, from Fourth Street and Gilman Street to San Pablo Avenue and Shattuck.
Those buildings are beautiful to sell in and demanding to keep clean. Natural light picks out every streak on a mirror, a bare slab shows tracked-in grit within hours, and old timber ceilings shed a fine layer of dust onto the merchandise below. Our crews plan each visit around the way your room is lit, laid out and shopped.
Display floors that set the tone
The floor is the stage for everything you sell. Polished and sealed concrete is dust-mopped and scrubbed with an auto-scrubber that lifts grime and picks up the water in one pass. Hardwood and engineered planks get a damp clean with the right product, tile and stone are cleaned with pads that leave the surface unetched, and area rugs inside furniture vignettes are vacuumed edge to edge.
Walk-off mats at each door are vacuumed on every visit so street grit stays out of the room. When a floor has lost its sheen, burnishing, a scrub-and-recoat or a complete strip-and-refinish reset can be booked through our commercial floor care service and timed around a quiet weekday. Our guide to strip and refinish or scrub and recoat shows the signs of worn finish to look for on vinyl tile.
Glass, mirrors and fixtures that show every touch
Shoppers touch what they like. Vanity mirrors, shower glass, chrome faucets, cabinet pulls, appliance fronts and display cases collect fingerprints all day, and a smudge on a brushed-nickel handle reads as wear to a buyer. Crews clean and polish each finish with the method it needs, from streak-free glass work to a soft dry buff on metal.
Lighting showrooms get their own attention: reachable pendants, shades, sconces and lamp bases are dusted by hand, and taller fixtures, skylight wells and the tops of high display walls can go on a lift high-dusting schedule. Entry doors and interior glass get a full cleaning each visit, and storefront glass outside can be added with commercial window cleaning.
Sample walls, design tables and working displays
The sample library is where a project gets decided. Swatch racks, tile boards, finish chips and fabric books are dusted without being rearranged, and the large tables where designers spread out plans are wiped around any samples your team has left out. Consultation desks, chairs and touchscreen kiosks are cleaned so a client meeting starts at a fresh table.
Working kitchen and bath vignettes are cleaned like the real thing. Countertops, sinks, faucets, cooktop surfaces and toilet displays are wiped down, water spots come off the basins, and display appliance exteriors are polished so a buyer can picture the room in their own home.
Restrooms, lounges and the rooms behind the floor
A customer who stays for a long design appointment will use your restroom and your coffee bar. Restrooms are cleaned and disinfected on every visit, mirrors and counters are polished, and paper towels, tissue and hand soap are topped up from supplies we bring or from your own stock. Seating areas, coffee stations and the play corner are wiped and reset.
Behind the floor, the sales offices, staff break room, receiving area and any workshop doorway are on the route too. Floors near shared doors with a fabrication space get extra passes, so dust from the back stays out of the showroom.
Ready before the doors open
Showroom cleaning runs once you close for the day or in the hours before opening, on the nights you choose, and your staff walks in to a finished room. A new collection install, an open house or a trade night can add a reset visit before and after the event.
Busy Saturdays are when fingerprints and spills pile up fastest. Day porter service keeps glass, restrooms and the coffee bar in shape while customers are in the room, and the night crew takes care of the full clean once you lock up.
Car, kitchen, flooring, furniture and design showrooms
Each kind of showroom gets a plan built for it. Car showrooms pair display-floor and glass care with lounges and the service drive, covered in detail on our car dealership cleaning page. Kitchen and bath galleries need water-spot and fixture work, flooring showrooms need sample boards and mixed floor types handled with care, and furniture and lighting floors need careful dusting around pieces that can’t move. Storefront shops that sell alongside a showroom share much of the retail cleaning routine.
Crews are background-checked, we carry insurance, bonding and workers’ compensation, and supervisors run quality inspections, so you can hand over the keys to a room full of merchandise with confidence.
How a showroom cleaning quote comes together
Your price follows your room: floor area and floor types, how much glass and mirror is on display, the number of vignettes and sample walls, restrooms and lounges, visits per week, porter hours and any event resets or periodic floor work. Book a free walkthrough ahead of your next event and point out the mirrors, samples and aisles that matter most. Each of those parts shows up as its own item on the written quote, so you can add porter time or floor care as your season picks up.
Common questions
Can the cleaning finish before our first design appointment?
Yes. Crews work after close or before dawn, finishing the display floor, glass and restrooms ahead of your first appointment.
What happens to our sample boards and vignettes during a clean?
Crews clean around displays and sample walls and dust them in place, leaving every piece and swatch where your team set it.
How do you clean polished concrete in a showroom?
The slab is dust-mopped for loose grit first, then an auto-scrubber washes the concrete and vacuums up the used solution.
Can you clean high light fixtures and skylight wells?
Yes. Reachable fixtures are dusted by hand, and tall fixtures, skylight wells and high display tops can be cleaned from a lift on a set schedule.
Can we get extra help for a launch event or busy weekend?
Yes. A reset visit before and after the event, or a day porter during open hours, keeps the room ready while customers are in it.
